Maxcess MAGPOWR Spyder-Plus, Instruction Manual

Page: 55 / 60

12.0 COMMUNICATION (OPTIONAL)
www.maxcessintl.com MAGPOWR Spyder-Plus MI 850A320 1 M Page 55 of 60
Starting
Modbus
Register
Parameter Name Parameter
Format
Parameter
Type
Used with
Control
Types
Read /
Write
Range
0x44 System Type (Load Cell) BYTE Data LC Read /
Write
0 = Unwind
1 = Rewind
2 = Type 1
3 = Type 2
4 = Type 3
5 = Type 4
0x45 System Type (Dancer) BYTE Data DT, DS Read /
Write
0 = Unwind
1 = Rewind
0x46 Control Type BYTE Data LC, DT, DS,
OPT
Read /
Write
0 = Load Cell
1 = Dancer, Torque
2 = Dancer, Speed
3 = Tension, Diameter
0x47 Output Range BYTE Data LC, DT, DS Read /
Write
0 = Normal
1 = -10V to +10V
0x48 Maximum Tension FLOAT Cal LC, DT, DS Read /
Write
{ 0.0 - 99999.0 } lb.
0x4A Applied Tension FLOAT Cal LC, DT, DS Read /
Write
{ 0.0 - 99999.0 } lb.
0x4C Core Diameter FLOAT Data LC, OPT Read /
Write
{ 0.0 - 999.0 } in.
0x4E Full Roll Diameter FLOAT Data LC, OPT Read /
Write
{ 0.0 - 999.0 } in.
0x50 Diameter Calibration Constant FLOAT Cal LC, OPT Read /
Write
{ 0.0 - 99999.0 }
0x52 Tension Units BYTE Data LC, DT, DS Read /
Write
0 = pound
1 = ounce
2 = Kilogram
3 = Newton
4 = gram
0x53 Distance Units BYTE Data LC, OPT Read /
Write
0 = inch
1 = feet
2 = millimeter
3 = centimeter
4 = meter
0x54 Proportional Gain (Load Cell) FLOAT Data LC Read /
Write
{ 0.0 - 999.0 }
0x56 Integrator Time (Load Cell) FLOAT Data LC Read /
Write
{ 0.0 - 60.0 } seconds
0x58 Derivative Time (Dancer) FLOAT Data DT Read /
Write
{ 0.0 - 60.0 } seconds
0x5A Error Limit FLOAT Data LC, DT, DS Read /
Write
{ 0.0 - 100.0 } %
0x5C Start Time FLOAT Data LC Read /
Write
{ 0.0 - 60.0 } seconds
0x5E Stop Time FLOAT Data LC, DT, DS,
OPT
Read /
Write
{ 0.0 - 60.0 } seconds
0x60 Stop Multiplier FLOAT Data LC, DT, OPT Read /
Write
{ 0.0 - 99.0 }
0x62 Hold Level FLOAT Data LC, DT Read /
Write
{ 0.0 - 100.0 } %
0x64 Torque Output 0% Calibration Point
(0-10V, 4-20mA) FLOAT Cal LC, DT, DS,
OPT
Read /
Write
{ 0.0 - 1.0 }
0x66 Torque Output 100% Calibration Point
(0-10V, 4-20mA) FLOAT Cal LC, DT, DS,
OPT
Read /
Write
{ 0.0 - 1.0 }
0x68 Torque Output 0% Calibration Point
(-10V to +10V) FLOAT Cal LC, DT, DS,
OPT
Read /
Write
{ 0.0 - 1.0 }
0x6A Torque Output 100% Calibration Point
(-10V to +10V) FLOAT Cal LC, DT, DS,
OPT
Read /
Write
{ 0.0 - 1.0 }
0x6C Tension Meter 100% Calibration Point FLOAT Cal LC, DT, DS,
OPT
Read /
Write
{ 0 - 511 }
0x6E Tension Setpoint 0% Calibration Point FLOAT Cal LC, OPT Read /
Write
{ 0 - 4095 }