Max Phantom 2000, Installation And Owner'S Manual

Page: 12 / 46

10
installation
arm position options
Gates in Closed Position
Gate in Opened Position
Arms are NOT installed in LOCKED position.
High Traffic Arm Option
Retro-Fit Arm Option
If a vehicle tries to push gates
open, arms will give when NOT
in the locked position and allow
gates to move without damaging
the gate operators.
The tamper relay will be
activated for a few seconds
which will trigger a camera or
alarm system if desired.
When replacing an existing gate operator, the arm may not be able
to conform to the preferred arm position (90° from gate in open
position). The positions illustrated below can be acceptable as long
as the gate operator cycles smoothly and there is
NO gate hesitation
when gate starts cycling in either direction.
After you’re satisfied testing the arm in the FULL OPEN and FULL CLOSED positions, weld gate bracket and arm.
Full Open
Full Closed
POWER
IN
POWER/SOLAR
IN
BA
TTER
Y
IN
www
.max.us.com
Made in USA
BA
TTER
Y
PA
C
K
TO MOTOR CONTROLLER
AC ON
POWER
OFF
MAX PS-24
POWER SUPPLY
FUSE
7 AMP
IN
Made in USA
Power
INPUTS
MC-100
JOG
RIGHT JOG
LEFT UL
Entrap
Matrix
On Line
ERD Sensitivity
Photo Cell Limit SW On Line Edge 2
Edge 1 Edge 1 Edge 2 Photo Cell GND Jog R
T
Jog L
T
MOTOR OVERLOAD
Motor Controller
ERD
Min Max
POWER IN
POWER/SOLAR
IN
BA
TTER
Y
IN
www
.max.us.com
Made in USA
BA
TTER
Y
PA
C
K
TO MOTOR CONTROLLER
AC ON
POWER
OFF
MAX PS-24
POWER SUPPLY
FUSE
7 AMP
IN
Made in USA
Power
INPUTS
MC-100 JOG
RIGHT JOG
LEFT
UL Entrap Matrix On Line
ERD
Sensitivity
Photo
Cell
Limit SW
On Line
Edge 2
Edge 1 Edge 1 Edge 2 Photo Cell
GND
Jog R
T
Jog L
T
MOTOR OVERLOAD
Motor Controller
ERD
Min Max
Illustrations not to scale
Arm MUST be installed level.
Preferred arm position
is 90° from open gate.
weld completely around arm tubing and gate bracket.
Locked Positio
n
Gate Bracket
Assembly
Arm Elbow
Assembly
arm connection to gate
Arm
Re-Attach Arm to Operator:
Limit Pin
Limit Tabs
Slot
Release Handle Clamp
Limit pin MUST fit into slot in
bottom of release handle clamp
directly under the arm when
re-attaching arm to operator.
90°
Gate in Opened Position
90°