Max Phantom 2000, Installation And Owner'S Manual

Page: 42 / 46

40
Insert key on control box, turn and HOLD (in either direction) to MOVE gate.
•
The moving gate gets PUSHED by a moving VEHICLE .
maintenance
electronic gate release
audible alarm
CAUTION: Keep pedestrians and vehicles clear of the gate while it is moving.
If the Alarm Sounds During Normal Gate Operation:
When the gate encounters TWO consecutive obstructions before
completing a gate cycle, the alarm will sound and the gate will PAUSE in the position where the second obstruction occurred.
CHECK THE GATE AREA FOR ANY PROBLEMS BEFORE pressing the alarm reset button on the control box to shut off the
alarm and reset the gate. NOTE: Alarm will automatically shut-off after five minutes but will not allow gate to operate until the
alarm reset button is pressed.
Some reasons why the alarm sounds:
Alarm Reset
Button
INSIDE Property
Gate is Closing
Moving Vehicle is Entering
OUTSIDE Property
•
A FOREIGN OBJECT is on the gate frame while the gate is moving.
•
HINGES are TOO TIGHT or BROKEN , gate CANNOT move freely .
•
Gate is STUCK or BENT in an awkward position.
•
The gate is TOO HEAVY .
•
The gate operator tries to close the gate but
gate gets CAUGHT on an object and cannot move.