Rad-97
Chapter 4: Operation
www.masimo.com
96
Masimo
Device Output
The
Device Output
screen allows the user to configure additional data output options. A Nurse
Call can be triggered based on alarm, low Signal IQ events, or both. In addition, Nurse Call
Polarity can be inverted to accommodate local Nurse Call station requirements.
The
Device Output
screen can also be accessed by selecting the Device Output icon on the
Status Bar. See
About the Status Bar
on page 49.
Option
Description
Factory
Default
Setting
Configurable
Settings
Nurse Call
Trigger
Controls the source of monitoring which
sets off the trigger.
Alarms
Alarms,
SIQ, or
Low SIQ
Nurse Call
Polarity
Controls the mechanism of action for
triggering to occur. Should be changed to
accommodate institutional Nurse Call
settings.
Normal
Normal or
Inverted
USB Port*
Controls the communication protocol used
to transmit parameter data to a 3rd party
device or an EMR system.
IAP
None, IAP, ASCII
1, or IntelliBridge
IntelliBridge
Module
Identifies the type of IntelliBridge Module
connected to the USB Port.
Note:
USB Port selection must be
Intellibridge for option to be available.
EC-10/B
EC-10/B or A
* When IAP, ASCII 1, or IntelliBridge is selected, the Device Output icon displays in the Status
Bar. If
None
is selected, no Device Output icons display in the Status Bar. See
About the
Status Bar
on page 49.
Note:
The Nurse Call feature is disabled when Audio Pause is enabled and Nurse Call Trigger
is set to
Alarms
. For more information about Audio Pause, see
Audio Pause
on page 126.
