Rad-97
Chapter 7: Admit to and Discharge from Patient SafetyNet
www.masimo.com
119
Masimo
4.
In the assignment section of the
Patient
menu (see Fig. 3), select the primary
pager, then press
Admit
.
Fig. 3
Not Monitoring Message
When the sensor is off the patient for an extended period of time, a
Not Monitoring
message
will appear on the screen. Acknowledge the message by pressing
Cancel
or
Discharge
.
Press
Discharge
to discharge the patient that is currently admitted on Rad-97, or press
Cancel
to
keep the same patient admitted.
Monitoring Resumed Message
When the sensor is taken off and placed back onto a patient, a
Monitoring Resumed
message
will appear on the Rad-97 screen.
If this is a new patient, press
Discharge
to discharge the previous patient. If the same patient
is being monitored, press
Confirm
to continue monitoring the same patient.
