Model: MC-1-DE
Doc Ref. No:-m05dom102
Issue No:-00
Page 67 of 76
v) Get / Get Next / Get Bulk / Set / Walk Command:
To perform any of Get / Get Next / Get Bulk / Set / Walk command you need to first select variable
(corresponding OID).
11.2.4 SNMP Traps
MC-1-DE can send SNMP traps maximum up to two SNMP managers if configured. Available traps in
MC-1-DE model are described below.
In trap viewer you can check traps as shown figure.
meaning model MC-1-DE agent enabl
GPS_Status: When MC-1-DE
receive the trap, where value 1 indicates
nized.
Get / Get Next / Get Bulk / Set / Walk Command:
To perform any of Get / Get Next / Get Bulk / Set / Walk command you need to first select variable
can send SNMP traps maximum up to two SNMP managers if configured. Available traps in
model are described below.
In trap viewer you can check traps as shown figure. Factory set status of Trap Enable variable is 1
agent enabled to generate traps for SNMP Managers.
model gets synchronized or unsynchronized SNMP trap receiver will
receive the trap, where value 1 indicates model MC-1-DE synchronized and 0 indicates not synchr
User’s Manual
To perform any of Get / Get Next / Get Bulk / Set / Walk command you need to first select variable
can send SNMP traps maximum up to two SNMP managers if configured. Available traps in
status of Trap Enable variable is 1
model gets synchronized or unsynchronized SNMP trap receiver will
synchronized and 0 indicates not synchro-
