Model: MC-1-DE
Doc Ref. No:-m05dom102
Issue No:-00
Page 45 of 76
User’s Manual
H command can be used to view other parameters applicable values.
--------------------------------------------------------------------------------------
…
CONFIG
ENTER PASSWORD:
*******
PASSWORD OK
ENTER COMMAND TO CONFIGURE PARAMETER.
H FOR HELP MENU.
L FOR PRESENT SETTINGS.
L
PRESENT SETTINGS
--------------------------------------------------------------
COMMAND MODE NAME VALUE(x) MEANING
--------------------------------------------------------------
SBx Baud Rate
96 9600 Baud Rate
SPx Parity
0 Parity None
SSx Stop Bit
1 1 Stop Bits
SUx Time Format
2 LOCAL time
TC2x Transmit Mode
1 NMEA Mode
I_1344 IRIGB_IEEE_1344
D DISABLED
IRIG IRIGB_Time
L LOCAL
Z TIME ZONE
+00:00
ET1 Addi. Event1
00000060 Seconds Mode
ET2 Addi. Event2
00000060 Seconds Mode
EW1 Event1 ON Time
00000050 m.Seconds Mode
EW2 Event2 ON Time
00000050 m.Seconds Mode
SPD Propagation Delay
00000000 n.second Mode
-------------------------------------------------------------
ENTER COMMAND TO CONFIGURE PARAMETER
OR PRESS ENTER TO CONTINUE.
Z
ENTER THE TIME-ZONE OFFSET ADDED WITH THE DAY-LIGHT SAVING TIME, IF APPLI-
CABLE.
FORMAT: (+/-)(HH):(MM)
ENTER NOW:
+05:30
COMMAND COMPLETE
ENTER COMMAND TO CONFIGURE PARAMETER.
TO CONTINUE PRESS ENTER
TC23
COMMAND COMPLETE
ENTER COMMAND TO CONFIGURE PARAMETER.
TO CONTINUE PRESS ENTER
PINDIA
