User’s Manual
Open the HyperTerminal and start
serial RS232 port number) as shown in below figure. User can enter any name in “NAME” option.
Figure
In using HyperTerminal, it is recommended to select
ANSI, to avoid auto-detect making unwanted changes to the settings.
Figure
•
•
The port settings in HyperTerminal
match each other for fruitful communication. The
Doc Ref. No:
and start new connection on COMX of your PC. (X can be any available
serial RS232 port number) as shown in below figure. User can enter any name in “NAME” option.
Figure 21 HyperTerminal new connections.
it is recommended to select File\Properties\Settings and set
detect making unwanted changes to the settings.
Figure 22 RS-232 Male to Female cable connection.
•
Cross cable connection as mentioned in above figure is n
cessary to communicate with serial terminal.
•
Ensure serial communication setting done in GPS TIME SYNC
UNIT MC-1-DE unit and end device should be same for proper
communication.
HyperTerminal and the Serial port of GPS TIME SYNC UNIT
match each other for fruitful communication. The factory set settings of Serial port
Model: MC-1-DE
Doc Ref. No:-m05dom102
Issue No:-00
Page 32 of 76
can be any available
serial RS232 port number) as shown in below figure. User can enter any name in “NAME” option.
and set Emulation to
Cross cable connection as mentioned in above figure is ne-
GPS TIME SYNC
unit and end device should be same for proper
GPS TIME SYNC UNIT MC-1-DE must
factory set settings of Serial port of GPS TIME
