User’s Manual
10. NTP1
GPS TIME SYNC UNIT MC
and Telnet communication as shown in
11. NTP2
GPS TIME SYNC UNIT MC
and Telnet communication as shown in
12. Antenna
GPS TIME SYNC UNIT MC-1-DE
ing GPS antenna as shown in figure
to antenna. Refer Antenna Installation section
13.
LED status Indicators: There are total 4
other status indicators.
•
POWER: This LED illumination is RED color. This LED indicates the presence of power to
unit.
•
1PPS: This LED indicates the presence of 1PPS signal from GPS receiver module. It blinks
at every one second. The illumination is of RED color.
•
WATCHDOG: This LED illumination is RED color. This LED is ON when the unit becomes
unhealthy due to GPS receiver module
•
GPS LOCKED: This LED illuminates GREEN color if the GPS satellites signal
and GPS is LOCKED, and
Doc Ref. No:
MC-1-DE is equipped with 10/100 Mbps Ethernet output for NTP, SNMP
and Telnet communication as shown in figure 11.
Figure 11 NTP1 Output Terminal
MC-1-DE is equipped with 10/100 Mbps Ethernet output for NTP, SNMP
and Telnet communication as shown in figure 12.
Figure 12 NTP2 Output Terminal
Figure 13 Antenna Output Terminal
DE device have a BNC female connector at its Front
as shown in figure 13. This connector provides 5 VDC (4.7V DC to 5.2V DC)
to antenna. Refer Antenna Installation section 6 for connecting GPS Antenna.
There are total 4 LED indicators including power led indication and
: This LED illumination is RED color. This LED indicates the presence of power to
LED indicates the presence of 1PPS signal from GPS receiver module. It blinks
at every one second. The illumination is of RED color.
: This LED illumination is RED color. This LED is ON when the unit becomes
unhealthy due to GPS receiver module failure or internal failure.
: This LED illuminates GREEN color if the GPS satellites signal
and stay off if no GPS satellites are available.
Model: MC-1-DE
Doc Ref. No:-m05dom102
Issue No:-00
Page 18 of 76
is equipped with 10/100 Mbps Ethernet output for NTP, SNMP
is equipped with 10/100 Mbps Ethernet output for NTP, SNMP
panel for connect-
(4.7V DC to 5.2V DC) supply
LED indicators including power led indication and three
: This LED illumination is RED color. This LED indicates the presence of power to
LED indicates the presence of 1PPS signal from GPS receiver module. It blinks
: This LED illumination is RED color. This LED is ON when the unit becomes
: This LED illuminates GREEN color if the GPS satellites signals are available
