Model: MC-1-M (2U)
Doc. Ref. no. : m05/om/101
Issue no. 14
User’s Manual
Page 94 of 103
15.6 Optional Module – NTP Output
GPS Master Clock Model MC-1-M model is available with optional module having one NTP output per
module. NTP output is available at RJ-45 connector terminal on rear panel unit labeled as NTPx (where x
= 1 to 4) depending on number of optional NTP ports ordered.
15.6.1 Specifications:
Time Protocol: NTPv3, SNTP
Additional Protocol: Telnet
Interface: RJ-45 socket
NOTE:
a)
Refer section 11.3 for GPS Master Clock Model MC-1-M NTP technical details.
b)
Refer section 13.1 for Telnet technical details.
c)
If default command ETH0 as explained in section 9.2.8 is used, the Ethernet network address for
all optional NTP outputs is defaulted as explained in section 10.2.8.
GPS Master Clock Model MC-1-M model can be configured for maximum 3 additional optional NTP
outputs considering if no other type of optional outputs is configured.
