Model: MC-1-M (2U)
Doc. Ref. no. : - m05/om/101
Issue no. 14
Page 83 of 103
User’s Manual
GPS Master Clock model MC-1-M can be configured via several user interfaces. Besides the possibility to
setup parameters of SNMP using direct shell access via Telnet, SNMP based configuration is also
available. In order use the SNMP configuration, you need to fulfill the following requirements:
i)
GPS Master Clock model MC-1-M model MIB file must be present as well as included on the
client software.
ii)
Write community of the client software and GPS Master Clock model MC-1-M model must be
the same.
The mentioned MIB file can be found from the CD enclosed with the model MC-1-M model or you can
contact masibus support team at
. For reference here, we have used Ireasoning
MIB browser. Below are the steps to configure model MC-1-M using SNMP.
i)
Load MIB file to Browser:
Install MIB browser from Ireasoning
Open Browser from: Start
All Programs
iReasoning
MIB Browser.
Unload All MIB files from: File
Unload MIB
Now load masibusGPS.mib from: File
Load MIB
Path where file is saved.
You can find that MIB file is loaded in SNMP MIBs column.
ii)
Enter IP address of model MC-1-M in address Tab:
