Model: MC-1-M (2U)
Doc. Ref. no. : m05/om/101
Issue no. 14
User’s Manual
Page 50 of 103
------------------------------------------------------------------------------------------------------
H FOR HELP MENU.
L FOR PRESENT SETTINGS.
Z FOR TIME-ZONE SETTINGS.
L
PRESENT SETTINGS
------------------------------------------------------------------------
COMMAND MODE NAME VALUE(x) MEANING
------------------------------------------------------------------------
STx
Hour Mode 2 24 Hour Mode
SBx
Baud Rate
96
9600 Baud Rate
SPx
Parity
0 Parity None
SSx
Stop Bit
1 1 Stop Bit
SUx
Time Format 1 UTC time
TC2x Transmit Mode
1 NGTS Mode
Ex
Event Mode 1 Minute Mode
ET1
Addi. Event1
00000001 Second Mode
ET2
Addi. Event2
00000001 Second Mode
ET3
Addi. Event3
00000001 Second Mode
ET4
Addi. Event4
00000001 Second Mode
EW1
Event1 ON Time
00000050 m.second Mode
EW2
Event2 ON Time
00000050 m.second Mode
EW3
Event3 ON Time
00000050 m.second Mode
EW4
Event4 ON Time
00000050 m.second Mode
SPD Propagation Delay 00000000 n.second Mode
---------------------------------------------------------------------------
ENTER COMMAND TO CONFIGURE PARAMETER
OR PRESS ENTER TO CONTINUE.
---------------------------------------------------------------------------
Figure 10.7: Serial Message – Configuration Menu
•
Command: H [HELP Command]
Description: The ‘H’ command is a general HELP menu and will list all the commands to configure GPS
Master Clock Model MC-1-M. It lists all the possible values with their meaning of a particular command
which are applicable and considered as valid command. Values other than specified in output of help
command considered as Invalid value.
The HELP is displayed below:
-------------------------------------------------------------------------------------------------------------------------------------
H FOR HELP MENU.
L FOR PRESENT SETTINGS.
Z FOR TIME-ZONE SETTINGS.
H
GPS MASTER CLOCK SYSTEM
Version No: 101
