Mash Adventure 400cc, Owner'S Manual

Page: 41 / 42

XY400GY
-40-
might produces humid air causing erosion.
Caution:
Starting up the engine when the motorcycle is deposited will lead to harmful consequences. Because the engine does
not reach an enough temperature, the vapor emerging from burning would coagulate, causing the valve and muffler
rusty.
Using after the storage
-Install the full charged battery.
-Setting up the time for speedometer.
-Fully fuel the fuel tank.
-Thoroughly check the motorcycle before starting.
-Take a trial ride for a short distance.
Cleaning the sump
①
Drain off the engine oil thoroughly.
②
Disassemble each parts
③
Clean each part respectively.
④
Fuel with the appointed engine oil.
* This work only can be done by professional stuff, please have your sump cleaned at the authorized service station.
Specifications of torsional moment of fasteners
Ref. No. Position Spec. (N/m) Ref. No. Position Spec. (N/m)
1
Fastening nut, Fr.
wheel axle
40～50 5
Fastening nut, handle
bars
20～30
2
Fastening nut, RR.
Wheel axle
50～60 6
Fastening nuts,
muffler
20～30
3
Fastening bolt, RR.
shock absorber
30～40 7
Fastening nut, steering
shaft
60～90
4
Nut, engine
suspension
20～30/30～40 8
Fastening bolt,
Fr.shock absorber
20～30
Specifications of torsional moment of engine fasteners
Ref. No. Position Spec. (N.m) Ref. No. Position Spec.(N.m)
1 Fastening bolt M6,
cam support
8~12N·m
6
Oil-draining plug 20~25N·m
2 Fastening nut, cylinder 30~38N·m 7 Spark plug 10~15N·m
3
Fastening nut, clutch 38~45N·m
8 Bolt, right and left
crankcase
8~12N·m
4 Bolt, magneto rotor 30~38N·m 9 Nut, crank shaft 30~35N·m
5 Bolt, cylinder head
cover
8~12N·m