Mash Adventure 400cc, Owner'S Manual, Page: 34 / 42

XY400GY
-33-
Tighten the screw to 8Nm after readjusting the
clamping screw.
Please adjust the no-load spring according to the
instruction of the picture aside.
Pivot of bearing
The pivot of bearing
【
3
】
for PDS suspension struts at the
swing arm is Teflon coated and must not be lubricated with
either grease or other lubricants. Grease and other lubricants
cause the Teflon coat to dissolve, whereby the bearing’s
length of life will be reduced dramatically
When cleaning your motorcycle with high-pressure water,
please don’t aim at the high pressure spray directly at the
pivot of bearing.
12. Tire
＜
Tire pressure checking
＞
Check the appropriate pressure degree through checking the
inspection tire touchdown level. Using the tire gauge to
inspect tire pressure and adjust it to the appropriate level
after finding tire touchdown shape anomaly.
＜
Tire pressure
＞
Specification
Front wheel 2
．
50-18/225
Rear wheel 2
．
75-18/280
Tire pressure
One man drive
Front wheel 225
Rear wheel 280
Two people
drive
Front wheel 225
Rear wheel 280
＜
Scratches/damage
＞
Check the tread and side whether with scratches and
damage.
＜
Abnormal wear
＞
Check the tread whether has abnormal wear indication.
＜
Foreign matters
＞
Checking the tread and side whether with nails, stone, etc.,
these things may have been penetrated into tire.