Mash Adventure 400cc, Owner'S Manual

Page: 13 / 42

ADVENTURE 400cc
-12-
The instrument of oil quantity display using bar code display, the display range 1-5 lattice, change number transition
time of 8 seconds. Show low oil alarm first lattice (low oil level indicator and the first oil quantity indicator is blinking),
in the 5 paragraph of article oil, oil and low oil content alarm lamp shines. When the oil gauge error 5 segment will
flicker (low oil quantity indicator lights)
。
Voltage display
This instrument voltage display using bar code display, the display range 1-5 lattice, change number transition time
is 30 seconds. When the voltage is low 3 lattice when the alarm (battery symbol and the current display number with
flashing).
Single mileage and total mileage display
This instrument is single mileage and total mileage display with digital display. Single mileage range 0 - 999.9Km,
total mileage range 0 - 999.9Km 0—999999Km
。
When the mileage value exceeds the value, the amount will
automatically reset and save
。
Single mileage and the total mileage of precise 0.1Km
。
"Clock" button
The meter clock shows the use of 12H system.Time display format: "AM 12:05 00"......"PM 1:56 00".....
Stopwatch.
The meter stopwatch with digital display, display the time format is: 00:00 00.The maximum time for 23:99 99.
Meter key functions are as follows
：
"Clock" button （
C
）

In clock mode or stopwatch mode, short press C key to switch the two modes

In clock mode, long press C button 2 seconds to enter or exit the clock setting mode, short press S key to switch
setting mode.
Short press R Short press R Short press R
Short press S Short press S
Short press S
Note: when the clock setting mode if the keypad is no operation time more than 10 seconds will automatically exit to
clock mode
2
． “
SELECT
”
button
（
S
）
a. In clock mode, short press S key to realize single mileage display mode and a single average speed display mode
switching
b. In the stopwatch mode, short press S key to achieve a stopwatch to time and pause switch
。
c. In clock mode, long press S button 2 seconds of metric-inch switching unit
。
3
． “
RESET
”
button
（
R
）
.
a. In the stopwatch mode, short press R key to realize stopwatch reset
。
b. In clock mode, long press R key for 2 seconds to realize the following two functions
：
HOUR flashes
MIM(10mim) flashes
MIM
（
1min
）
flashes
HOUR+1 MIM(10mim) +1
MIM
（
1min
）
+1