Marzocchi MAX COMP + ETA - 105, Manual

Page: 5 / 45

MX Comp + ETA
5/45
Warning
GENERAL REGULATIONS
· After a complete breakdown, always use
new MARZOCCHI seals when
reassembling.
· Before reassembly, wash all new and old
components and dry them with some
compressed air, making sure there are
neither breaks nor burrs.
· Never use flammable or corrosive
solvents to clean the parts as this could
damage the seals. If necessary use specific
detergents that are not corrosive, not
flammable or have a high flash point
compatible with the materials of the seals
and preferably biodegradable.
· Before reassembling, always lubricate the
parts of the fork in contact with some oil for
forks.
· Never pour lubricants, solvents or
detergents which are not completely
biodegradable in the environment; these
must be collected and kept in the relevant
special containers, then disposed of in
accordance with the regulations in force.
· Always grease the seal lips before
reassembling.
· Use only metric spanners and not
imperial. Imperial spanners may have
similar sizes to metric ones but they can
damage the bolts and screws making it
impossible to unscrew them.
· Use the right size and sort of screwdriver
to unscrew slotted or crosshead screws.
· When using a screwdriver to assemble or
dismantle metal stop rings, O-ring seals,
guide bushes or seal segments, avoid
scratching or cutting the components with
the tip of the screwdriver.
· Use only original spare parts.
· Before servicing the fork, we recommend
washing the fork thoroughly.
· Work in a clean, ordered and well-lit place.
· Carefully check there are no metal
shavings in the work area.