MX Comp + ETA
25/45
Disassembling
Pull the extractor rod so that the upper face
of the washer stops against the lower face
of the guide bush.
Insert the aluminium bush (
A
) in the seat of
the sealing ring.
While holding the main rod in position, the
aluminium bush drives the guide bushes
during extraction.
With striker (
D
) knock out and extract the
guide bush (
1
).
Remove the guide bush (
1
) from the
extractor.
Repeat the steps above to remove the
bottom guide bush.
Summary of Contents for MAX COMP + ETA - 105
