MX Comp + ETA
31/45
Assembling
· Insert the pre-assembled valve in the
piston rod from the three-point ring side as
shown.
· Insert the valve and the pumping element (
3
) into the stanchion.
Take great care not to damage the
segment and if necessary use a small
flat-tip screwdriver to help the piston of
the pumping element into the stanchion.
· Using the special round-nose pliers,
mount the stop ring (
2
) and check it fits
perfectly into its groove.
Summary of Contents for MAX COMP + ETA - 105
