MX Comp + ETA
6/45
Warning
FITTING THE FORK ONTO THE FRAME
The fork is supplied with “A-Head Set” steer
tube to be cut according to frame size it will
be used on.
Fitting the fork onto the bike frame is a very
delicate operation that must be carried out
at one of our service centres only.
The assembling on the frame and the
adjustment of the steer tube must be
carried out following the instructions of the
steering set manufacturer.
A wrong installation can be dangerous
for the rider.
Marzocchi does not guarantee the
assembly and accepts no liability for
damage and/or accidents arising from a
wrong installation.
The steer tube must be pressed into the
crown; its replacement must be carried
out by one of our service centres using
the adequate tools.
A wrong installation of the steer tube
into the crown may cause the rider to
lose the control of the bike and lead to
serious personal injury.
Summary of Contents for MAX COMP + ETA - 105
