MX Comp + ETA
44/45
Settings
REBOUND ADJUSTMENT
· With the 21mm socket spanner, loosen
the lock cap (
A
).
· Remove the lock cap (
A
).
· Insert the hexagon rod (
B
) provided in the
stanchion being careful to center the notch
of the adjusting screw (
C
).
· Turning the adjusting screw
counter-clockwise increases the hydraulic
damping making the fork slower during the
rebound phase.
· Turning the adjusting screw clockwise
decreases the hydraulic damping making
the fork more responsive during the
rebound phase.
Do not force the adjusting screw (C)
beyond its limit stops.
Summary of Contents for MAX COMP + ETA - 105
