MX Comp + ETA
9/45
Warning
ASSEMBLING THE WHEEL ON FORKS
WITH STANDARD DROPOUTS
Install the wheel following the
instructions of the bike’s manufacturer.
A good and reliable operation of the fork
and all of the parts linked to it mainly
depend on the correct fixing of the front
wheel.
For a correct operation of the fork, install
the wheel as explained below:
Check the correct fork-wheel alignment by
fully compressing the fork a few times.
Lift the front wheel above the ground; turn
the wheel a few times to verify the correct
alignment with the disk brake.
Summary of Contents for MAX COMP + ETA - 105
