MX Comp + ETA
7/45
Warning
INSTALLING THE DISK BRAKE SYSTEM
Installing the brake system is a very
delicate operation that must be carried out
at our specialised service centres only.
Marzocchi does not guarantee the
installation and accepts no liability for
damage and/or accidents arising from a
wrong installation
Improper installation of the disk brake
system can overstress the caliper
mountings, which may break. The
installation of the brake system must be
carried out following the instructions of
the brake system manufacturer.
Improper installation can be dangerous
for the rider.
Use only brake systems in accordance with
the fork’s specifications.
If the fork comes standard with V-brake
mounts, remove such mounts and
install the cable guide (A) on the left
side and cap (B) on the right side.
After installation always check that the
brake tube is correctly fixed to the
special mount (A).
Summary of Contents for MAX COMP + ETA - 105
