SPARTAN IRONWORKER
SAFETY
© MARVEL MFG. CO., INC. MANUAL
PL/OMiW-2CYL_V2
(08/07)
S-5
SAFE MATERIAL HANDLING
Loading and unloading material from the machine
presents safety hazards of its own.
•
Wear appropriate safety equipment including safety
shoes, hard hat, safety glasses, etc.
•
Do not allow any part of your body to come
between the material and any other surface. Serious
or fatal crushing injuries can result.
•
Never stand underneath the material while it is
being handled.
•
Always use equipment, in good, serviceable
condition, capable of safely handling the material.
This includes cranes, hoists, chains, and straps with
a lifting capacity greater than the weight of the
material being lifted.
•
Never lift the material higher than necessary.
ELECTRICAL HAZARDS
Contact with high voltage will cause death.
•
Never perform any maintenance on or near
electrical components until the machine’s power
source has been disconnected.
Lock out power
before servicing.
•
The
only
way to be sure the machine’s electrical
circuits are safe is to turn off the machine’s power
supply at your facility’s circuit panel and lock it out.
•
The “All Stop” pushbutton
does not
disconnect the
machine’s power supply. Hazardous electricity is
still present in the machine’s electrical circuits.
•
The machine’s main electrical disconnect switch
will remove electricity from the machine’s circuits,
however, deadly voltage is still present inside the
main electrical panel at the infeed (line) side of the
main fuses.
Keep hands and tools away from the
top of the electrical panel’s main fuses.
© MARVEL MFG. CO., INC. MANUAL 8SDN10871N (04/08)
S-5
SPARTAN IRONWORKER
SAFETY
