REPAIR PARTS
SPARTAN IRONWORKER
P-1
© MARVEL MFG. CO., INC. MANUAL
PL/OMiW-2CYL_V2
(08/07)
PARTS ORDERING
When ordering repair parts always provide the
following information:
o
Machine Model number (for example,
IW88D)
o
Machine Serial number (stamped on the
machine’s data plate)
o
Machine
voltage
(stamped
on
the
machine’s data plate)
o
Part number (not key number)
o
Part Description
o
Quantity required
This information is important to speed the
processing of your order and to avoid the cost
and inconvenience of shipping the wrong part.
To order parts or request service, contact:
Marvel Manufacturing Co. Inc.
3501 Marvel Drive
Oshkosh, WI 54902
Phone: (800) 869-9800
Fax: (920) 236-4156
IMPORTANT
For the purpose of clearly illustrating repair
parts, some photographs in this section depict
the machine with guards, covers, and other parts
necessary to operate the machine opened or
removed. Never operate the machine unless all
parts are installed and all guards and covers are
closed and functioning properly.
Avoid serious injury. Never
operate the machine unless
all
guards
and
covers
supplied with the machine
are installed and functioning
as designed.
HARDWARE AND FITTINGS
Important: This machine has been assembled
using primarily metric hardware.
It is beyond the scope of this parts section to
identify every common piece of hardware or
hydraulic and electrical fitting. In most cases
parts which are not identified will never need
replacement. If you do require a part that is not
identified in this manual, our parts and service
department will gladly assist you in identifying
and obtaining the part you need.
ELECTRICAL AND HYDRAULIC
COMPONENTS
When your machine requires replacement
electrical or hydraulic components, please refer
to the electrical and hydraulic schematics
supplied with your machine. These schematics
will contain part numbers that may be specific
to your particular machine.
CONTENTS
If you require a part which does not appear in
this manual, our service department will gladly
assist you in identifying and obtaining the part
you need.
Operator’s Side ................................ P-2
Discharge Side .................................. P-4
Notching Station .............................. P-6
Angle and Bar Shear ........................ P-8
Flat Shear ........................................ P-10
Punching Station ............................ P-12
Hydraulic Stripper ......................... P-15
Punching Cylinder ......................... P-16
Electric Back Gauge ...................... P-18
Shearing Cylinder .......................... P-19
Stroke Adjusters............................. P-21
Electrical Components................... P-23
Hydraulic System ........................... P-24
WARNING
