MAINTENANCE
SPARTAN IRONWORKER
J-4
© MARVEL MFG. CO., INC. MANUAL
PL/OMIW-2CYL-V2
(08//07)
MAINTENANCE
SPARTAN IRONWORKER
HYDRAULIC CAPACITIES (Gallons)
Machine
Capacity Oil Required
IW66D
and
IW66DX
30
24
IW88D
and
IW88DX
37
30
IW110D/2
and
IW110DX/2
50
42
IW135D
and
IW135DX
50
41
IW180DX
50
41
8.
Operate the machine and inspect for leaks.
Avoid serious injury.
Hydraulic
fluid
creates
a
serious slipping hazard. Clean
up all spilled hydraulic fluid
from the floor.
9.
Wipe up any hydraulic fluid that has
spilled.
10.
Reinstall the hydraulic compartment
access cover.
SLIDE ADJUSTMENT
The slide is the part of the machine to which the
moveable blades of the shearing and notching
stations are attached.
The slide is guided by pressure pads (A). The
pressure pads are adjusted by turning adjusting
screws which are clearly visible on the operator's
side of the machine.
The pressure pads (A) are adjusted by turning
adjusting screws which are clearly visible on the
operator's side of the machine.
To Adjust the Slide:
Avoid serious injury.
Turn off the machine's power
and lock it out before servicing
the machine.
1.
Turn off the machine's
main electrical disconnect switch and lock
it in the "Off" position.
2.
Loosen the hex nuts (B) which lock the
adjusting screws (C) in place.
The adjusting screws (C) are locked in position
by large locknuts (B).
3.
Tighten the adjusting screws (C) by
turning them clockwise.
4.
Back each adjusting screw (C) out by
turning them 1/3 of a turn counter-
clockwise.
WARNING
WARNING
A
C
B
