SPARTAN IRONWORKER
MAINTENANCE
© MARVEL MFG. CO., INC. MANUAL
PL/OMiW-2CYL_V2
(08/07)
J-5
5.
Lock the adjusting screws in position by
tightening the hex nuts (B).
PUNCH RAM ADJUSTMENT
The punch ram moves on a guide inside the ram
holder. When the punch ram wiggles or can be
turned, the ram guide must be adjusted.
To adjust the ram guide:
Avoid serious injury.
Press the Emergency Stop
pushbutton before performing
this procedure.
1.
Press the Emergency Stop pushbutton.
2.
Loosen the lock nuts (B, below).
The ram guide adjusting screws (C) protrude
from the guide housing and are locked in position
by lock nuts (B).
3.
Turn the adjusting set screws clockwise to
tighten the punch ram. Do not over-
tighten the adjusting screws.
4.
Operate the punch. The punch should
move smoothly.
5.
Press the Emergency Stop pushbutton.
6.
Tighten the lock nuts (B).
WARNING
B
C
