MACHINE DESCRIPTION
SPARTAN IRONWORKER
C-6
© MARVEL MFG. CO., INC. MANUAL
PL/OMIW-2CYL-V2
(08//07)
PUMP ON PUSHBUTTON
The "Pump On" pushbutton (item "E", page C-4)
starts the hydraulic pump motor. The motor must
be running before any of the machine's functions
will operate. The pushbutton illuminates when the
pump motor is running.
Note: The pump motor can not be started unless
the machine's Emergency Stop pushbutton(s) are
reset.
PUMP OFF PUSHBUTTON
The "Pump Off" (D, page C-4) pushbutton stops
the hydraulic pump motor and turns off the
machine.
The Pump Off pushbutton
does
not
disconnect
any
components from the power
supply. Avoid serious injury or
death by turning the machine's
power
off
at
the
Main
Electrical Disconnect switch
before servicing the machine.
NORMAL / JOG SWITCH
The "Normal / Jog" switch (F, page C-4) selects
between the "Normal" mode of operation in
which the tooling retracts automatically when the
foot switch is released, and the "Jog" mode in
which the tooling moves downward when the foot
switch is pressed, but maintains its position when
the foot switch is released.
Normal -
Use the "Normal” position for
normal operation of the machine. In this
position the tooling descends while the
foot switch is pressed all the way down,
stops moving when the foot switch is
released to its halfway point, and retracts
when the foot switch is released.
Jog -
Use the "Jog" position during
machine set-up. In this position the
tooling descends while the foot switch is
fully pressed and maintains its position
when the foot switch is released.
Note: Turn the Normal / Jog switch to "Normal"
to retract the tooling after machine set-up.
DOOR LOCK
The door lock (item G, page C-4) permits the
electrical compartment's door to be locked.
Note: To open the electrical compartment's door
the lock must be unlocked and the Main Electric
Disconnect switch must be turned off.
EMERGENCY STOP PUSHBUTTON
The red Emergency Stop pushbuttons (Items 13,
page C-2) causes all of the machine's functions to
stop. After a button is pressed it remains in the off
position preventing the machine from being
restarted until the button is reset by turning it
clockwise. After the button is reset the machine
can be restarted.
The
Emergency
Stop
pushbuttons do not disconnect
any components from the
power supply. Avoid serious
injury or death by turning the
machine's power off at the
Main
Electrical
Disconnect
switch before servicing the
machine.
PUNCHING STATION FOOT
SWITCH
This foot switch is used to activate the punching
station of the machine. The foot switch has three
positions: up, halfway down, and down. The
position of the foot switch and the setting of the
"Normal / Jog" switch together affect the
operation of the punching station.
WARNING
WARNING
