2-1
BEFORE DRIVING
56RH0-74E
Keys
54G489
Your vehicle comes with a pair of keys.
The key(s) may or may not be equipped
with a transmitter depending on model
variant. Keep the spare key in a safe
place. One key can open all of the locks on
the vehicle
The key identification number is stamped
on a metal tag provided with the keys or on
the keys. Keep the tag in a safe place. If
you lose your keys, you will need this num-
ber to have new keys made. Write the
number below for your future reference.
Immobilizer system
This system is designed to help prevent
vehicle theft by electronically disabling the
engine starting system.
The engine can be started only with your
vehicle’s original immobilizer ignition key
or keyless push start system remote con-
troller, which has an electronic identifica-
tion code programmed in it. The key or
remote controller communicates the identi-
fication code to the vehicle when the igni-
tion switch is turned to “ON” position or the
engine switch is pressed to change the
ignition mode to “ON”. If you need to make
spare keys or remote controllers, see your
an authorised Maruti Suzuki workshop.
The vehicle must be programmed with the
correct identification code for the spare. A
key made by an ordinary locksmith will not
work.
80JM122
If the immobilizer/keyless push start sys-
tem warning light blinks or comes on when
the ignition switch is in “ON” position or the
ignition mode is “ON”, the engine will not
start.
For vehicles without a keyless push
start system
If this light blinks or comes on, turn the
ignition switch to “LOCK” position, and
then turn it back to “ON” position.
If the light still blinks after or comes on the
ignition switch is turned back to “ON” posi-
tion, there may be something wrong with
your key or with the immobilizer system.
Ask an authorised Maruti Suzuki workshop
to have the system inspected.
For vehicles with a keyless push start
system
If this light blinks or comes on, change the
ignition mode to “LOCK” (OFF), and then
change it back to “ON”. Also refer to “If the
PUSH indicator light blinks or comes on
and the engine cannot be started” in “Start-
ing engine (vehicle with keyless push start
system) (if equipped)” in “OPERATING
YOUR VEHICLE” section.
If the light still blinks or comes on after the
ignition mode is changed back to “ON”,
there may be something wrong with your
key or with the immobilizer system. Ask an
authorised Maruti Suzuki workshop to
have the system inspected.
The immobilizer/keyless push start system
warning light may also blinks or comes on
if the remote controller is not in the vehicle
when you close the door or attempt to start
the engine.
KEY NUMBER:
EXAMPLE
