MARUTI SUZUKI Dzire Manual Download Page 244

Page: 244 / 324

5-65

OTHER CONTROLS AND EQUIPMENT

56RH0-74E

Remote audio controls

(if equipped)

Controlling basic functions of the audio

system is available using the switches on

the steering wheel.

56RH00552

Adjusting the volume

• To increase the volume, hold down the

VOLUME knob (1) to “+” side. The vol-

ume will continue to increase until the

switch is released.

• To decrease the volume, hold down the

VOLUME knob (1) to “-” side. The vol-

ume will continue to decrease until the

switch is released.

• To mute the sound, press the switch (2).

Selecting the mode

Press the “MODE” switch (3).

Each time the switch is pressed, the mode

will change as follows:

It is possible to turn on the audio system

by pressing the switch (3).

Selecting the radio station (AM, FM1,

FM2, DAB1, DAB2 mode)

• To select the next preset station, press

“ ” of the switch (4) only for a moment.

• To select the previous preset station,

press “ ” of the switch (4) only for a

moment.

• To scan a higher frequency radio station,

press “ ” of the switch (4) for 1 second

or longer.

• To scan a lower frequency radio station,

press “ ” of the switch (4) for 1 second

or longer.

Selecting the track (CD, USB (iPod

Bluetooth

audio mode)

• To skip to the next track, press “ ” of the

switch (4) only for a moment.

• To skip to the previous track, press “ ” of

the switch (4) twice only for a moment.

When the switch (4) is pushed down

once only for a moment, the track cur-

rently being played will start from the

beginning again.

Fast forwarding/rewinding a track

• To fast forward a track, press “ ” of the

switch (4) for 1 second or longer.

• To fast rewind a track, press “ ” of the

switch (4) for 1 second or longer.

(1)

(3)

(4)

(2)

EXAMPLE

AM (Radio)

FM1 (Radio)

FM2 (Radio)

Bluetooth

audio (if equipped)

AUX (if equipped)

USB (iPod

) (if equipped)

Summary of Contents for Dzire





































































































































































































































































































































Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands

MARUTI SUZUKI Dzire, Manual

Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands