MARUTI SUZUKI Dzire Manual Download Page 85

Page: 85 / 324

2-80

BEFORE DRIVING

56RH0-74E

56RM02028

NOTE:

The currently selected setting item is sur-

rounded by a frame.
NOTE:

• If you push and hold the indicator selec-

tor knob (3) to enter into the setting

mode when the display (C) shows aver-

age fuel consumption, average speed,

driving time, total idling stop time and

total idling fuel saved (if equipped), the

value will be reset simultaneously. If you

do not want to reset the value, push the

indicator selector knob quickly to switch

the indication of the display.

• If you press the engine switch or start to

move the vehicle when the display is in

the setting mode, the setting mode will

be canceled automatically.

Distance unit

(Odometer / trip meter / driving range /

average speed distance unit setting)

You can change the units in which odome-

ter / trip meter / driving range / average

speed distance is displayed.

Fuel economy

(Fuel consumption unit setting)

You can change the units that fuel con-

sumption is displayed in.

Language

You can change the language of the infor-

mation display.

Fuel reset

(Average fuel consumption reset set-

ting)

You can change when the value of aver-

age fuel consumption is reset.

Temperature

(Temperature unit setting) (if equipped)

You can change the units that temperature

is displayed in.

• To change the temperature unit, select

“Temperature” in “Setting mode”. Then,

select “°C” or “°F”.

NOTE:

When you change the units that tempera-

ture is displayed in, the automatic heating

and air conditioning system temperature

display units will be changed automatically.

Set sensors

(Parking sensor setting)

The parking sensor can be switched

between the normal mode and trailer

mode.

Clock setting

(Adjusting the clock)

• Adjust the clock by selecting “Clock set-

ting” in “Setting mode”. Then, select

“Adjust clock”.

• To change the hour indication, turn the

indicator selector knob (3) left or right

repeatedly when the hour indication

blinks. To change the hour indication

quickly, turn and hold the indicator selec-

tor knob (3). To set the hour indication,

push the indicator selector knob (3) and

the minute indication blinks.

• To change the minute indication, turn the

indicator selector knob (3) left or right

repeatedly when the minute indication

blinks. To change the minute indication

quickly, turn and hold the indicator selec-

tor knob (3). To set the minute indication,

push the indicator selector knob (3).

(Selecting 12H/24H format)

• Switch the time indication between 12-

hour and 24-hour format by selecting

“Clock setting” in “Setting mode”. Then,

select “12H” or “24H”.

EXAMPLE

Door lock

Summary of Contents for Dzire





































































































































































































































































































































Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands

MARUTI SUZUKI Dzire, Manual

Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands