MARUTI SUZUKI Dzire Manual Download Page 49

Page: 49 / 324

2-44

BEFORE DRIVING

56RH0-74E

Conditions of front air bags deployment

(inflation)

80J097

• In frontal collision with a fixed wall that

does not move or deform at more than

about 25 km/h.

80J098E

• Strong impact equivalent to frontal colli-

sion such as above at left and right

angles of about 30 degrees (1) or less

from the front of your vehicle.

Conditions when front air bags may

inflate

Receiving a strong impact to the lower

body of your vehicle, the front air bags may

inflate.

80J099

• Hitting a curb or medial strip.

80J100E

• Falling into a deep hole or ditch.

80J101

• Landing hard or falling.

Front air bags may not inflate

The front air bags may not inflate when a

strong impact has not occurred since the

collision object was easy to be deformed

or moved, or the collided portion of your

vehicle was easy to be deformed.

Also, front air bags may not inflate in many

cases when the crash angle is greater than

about 30 degrees at left and right angles

from the front of your vehicle.

80J102

• Frontal collision to a stopped vehicle at

less than about 50 km/h.

EXAMPLE

(1)

EXAMPLE

Summary of Contents for Dzire





































































































































































































































































































































Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands

MARUTI SUZUKI Dzire, Manual

Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands