MARUTI SUZUKI Dzire Manual Download Page 322

Page: 322 / 324

11-4

56RH0-74E

*1 If you cannot prepare tires with the specified load index rating and speed symbol, prepare tires with higher load index rate and speed

symbol.

*2 If you prepare snow tires;

• Check that they are tires of the same size, structure and load capacity as the originally installed tires.

• Mount the snow tires on all four wheels.

• Understand that the maximum permissible speed of snow tires is generally less than the originally installed tires.

*3 The spare wheel provided with alloy wheel variant is of steel wheel rim, hence follow 4 tire rotation only (Refer: Section Inspection

and Maintenance).

ITEM: Wheels and tires

Tire size, front and rear

165/80R14 85T

, 185/65R15 88T

, 185/65R15 88H

Rim size

165/80R14 tire: 14X5J

185/65R15 tire: 15X5 1/2J

Tire pressures

For the specified tire pressure, see the tire information label located

on the driver’s door lock pillar.

Recommended snow tire

165/80R14

or 185/65R15

Tire size, spare

165/80R14 85T (Steel wheel)

Summary of Contents for Dzire





































































































































































































































































































































Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands

MARUTI SUZUKI Dzire, Manual

Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands