MARUTI SUZUKI Dzire Manual Download Page 56

Page: 56 / 324

2-51

BEFORE DRIVING

56RH0-74E

To select 12/24H format, refer to “setting

mode” in this section.

Display (B) :

Trip meter / Odometer / Instanta-

neous fuel consumption / Average

fuel consumption / Driving range

The display (B) shows one of the following

indications, trip meter A, trip meter B,

odometer, instantaneous fuel consump-

tion, average fuel consumption or driving

range.
To switch the display indication (B), push

the trip meter selector knob (1) or the indi-

cator selector knob (2) quickly.

56RH00269

(a) Trip meter A

(b) Trip meter B

(d) Average fuel consumption

(e) Driving range

(f) Instantaneous fuel consumption

NOTE:

• Indications will change when you push

and release a knob.

• The display shows estimated values.

Indications may not be the same as

actual values.

WARNING

If you attempt to adjust the display

while driving, you could lose control

of the vehicle.
Do not attempt to adjust the display

while driving.

Push the trip meter selector

knob (1).

Push the indicator selector

knob (2).

EXAMPLE

(a)

(b)

(c)

(d)

(e)

(f)

WARNING

If you attempt to adjust the display

while driving, you could lose control

of the vehicle.

Do not attempt to adjust the display

while driving.

Summary of Contents for Dzire





































































































































































































































































































































Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands

MARUTI SUZUKI Dzire, Manual

Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands