MARUTI SUZUKI Dzire Manual Download Page 135

Page: 135 / 324

3-18

OPERATING YOUR VEHICLE

56RH0-74E

Drive (D) mode

When the Drive (D) mode is activated, the

most appropriate gear position is automati-

cally selected upon operation of the accel-

erator pedal and variation of vehicle

speed.

Normal driving:

1) Start the engine as instructed in “Start-

ing the engine” in this section.

2) With your foot on the brake pedal, shift

the gearshift lever to the “D” position.

When the gearshift lever is shifted to

the “D” position, the gear will be shifted

to 1st.

76MH0A057

NOTE:

• If 1st gear cannot be engaged even

though the gearshift lever has been

shifted from the “N” to the “D” position,

the system will re-try shifting automati-

cally. This will take some time, noise

may be heard from the gears, and shift-

ing gear shock may occur. However,

they do not indicate malfunction.

• The “N” indicator will flash, the depress

brake pedal indicator will come on and a

warning buzzer (long pulse sound) will

sound if any of the following cases

occur;

– If you shift the gearshift lever from the

“N” to the “D” position without depress-

ing the brake pedal

– If the system is unable to re-try shifting

You should depress the brake pedal and

shift the gearshift lever to “N” position, then

shift to “D” again.

3) Release the parking brake and brake

pedal.

4) Depress the accelerator pedal slowly.

NOTICE

A buzzer will sound continuously if

the vehicle is operated with the gear-

shift lever in-between of each shift

positions. The vehicle will become

inoperative if you continue to operate

the vehicle with the gearshift lever in

between shift positions.

EXAMPLE

WARNING

• While driving the vehicle, do not

shift the gearshift lever to the “N”

position. The engine brake may not

work and you may get involved in

an unexpected accident. If you

return the gearshift lever from “N”

to “D” because of unintended shift-

ing, the gear position will be shifted

according to the current vehicle

speed.

• Always keep your foot on the brake

pedal while stopped with the

engine running. This operation pre-

vents the vehicle from moving due

to unintended activation of the

creeping function.

NOTICE

If the gearshift lever cannot shift into

any position, or the gear is changed

to “N” position automatically when

the vehicle speed becomes less than

10 km/h, there may be a systematic

malfunction. In this case, ask an

authorised Maruti Suzuki workshop

to inspect the Auto Gear Shift system

as soon as possible.

Summary of Contents for Dzire





































































































































































































































































































































Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands

MARUTI SUZUKI Dzire, Manual

Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands