MARUTI SUZUKI Dzire Manual Download Page 151

Page: 151 / 324

3-34

OPERATING YOUR VEHICLE

56RH0-74E

Information message

Sound

Cause and remedy

52RM30660

Off

The engine is restarting automatically because one of the following automatic engine

restart conditions is met.

• The temperatures at air conditioner outlets have changed considerably after the auto-

matic engine stop to the point of affecting the cooling/heating performance.

• The lead-acid battery has discharged substantially.

• Some time has elapsed after the start of the automatic engine stop.

• The defroster is turned on.

56RM03027

Off

The engine restarted automatically.

56RM03127

The engine does not restart automatically or the engine stalls under the following condi-

tions:

• When a hood was opened during ENG A-STOP is active. Close the hood.

• For manual transmission vehicle, if driver’s door is opened or the driver’s seat belt is

unfastened when ENG A-STOP is active. Close the driver door and fastened driver’s

seat belt.

Summary of Contents for Dzire





































































































































































































































































































































Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands

MARUTI SUZUKI Dzire, Manual

Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands