MARUTI SUZUKI Dzire Manual Download Page 205

Page: 205 / 324

5-26

OTHER CONTROLS AND EQUIPMENT

56RH0-74E

Defrost switch (5)

56RH00538

Push the defrost switch (5) to turn on the

defroster.

DEFROST

56RH00530

Temperature-controlled air comes out of

the windshield defroster outlets, the side

defroster outlets and the side outlets.

NOTE:

When the defrost switch (5) is pushed to

turn on the defroster, the air conditioning

system will operate and FRESH AIR mode

will be selected automatically. In very cold

weather, however, the air conditioning sys-

tem will not operate.

Air conditioning switch (6)

56RH00540

The air conditioning switch (6) is used to

turn on and off the air conditioning system

only when the blower is on. To turn on the

air conditioning system, push in the switch

and “A/C” will appear in the display. To turn

off the air conditioning system, push in the

switch again and “A/C” will go off.

(5)

EXAMPLE

(8)

(7)

(6)

(1)

EXAMPLE

Summary of Contents for Dzire





































































































































































































































































































































Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands

MARUTI SUZUKI Dzire, Manual

Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands