MARUTI SUZUKI Dzire Manual Download Page 83

Page: 83 / 324

2-78

BEFORE DRIVING

56RH0-74E

during the driving is shown as a graph

(15).
G position history graph when the vehicle

stopped can be changed to indicate or

hide. For details, refer to “Setting mode” in

this section.

NOTE:

• If G position history graph at the vehicle

stopped has been set in indication

mode, the graph (15) is shown for sev-

eral seconds when you change the igni-

tion mode to “LOCK” (OFF) after driving.

• The graph is shown approximately and

the actual movement may differ.

Torque and power

Present engine torque and power are

shown.

Accelerator and brake (if equipped)

Present accelerator pedal depressing

degree and brake line pressure are shown.

The display is selectable to indicate or not

to indicate. For details, refer to “Setting

mode” in this section.

Information shown after driving

When you press the engine switch to

change the ignition mode to “LOCK”

(OFF), the following information appears

for several seconds on the information dis-

play.

56RM02026

Gear position (for auto gear shift

vehicles) / Gearshift Indicator (for

manual transmission vehicles)

56RM02027

(1) Gear position

(2) Manual mode indicator

(3) Drive mode indicator

Gear position

(for auto gear shift vehicles)

The display shows the current gear posi-

tion (1).

NOTE:

For Auto Gear Shift models, when the

gearshift lever position and the gear posi-

tion indication in the information display

are unmatched, the indication will blink and

the interior buzzer will sound. Refer to

“Auto Gear Shift” in the “OPERATING

YOUR VEHICLE” section for details.

Manual mode indicator

(for auto gear shift vehicles)

When you are using the manual mode, the

display shows the manual mode indicator

(2).

WARNING

Do not look in the display intensively

while driving. Doing so may result in

an accident.

EXAMPLE

(2)

(3)

(1)

EXAMPLE

Summary of Contents for Dzire





































































































































































































































































































































Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands

MARUTI SUZUKI Dzire, Manual

Search results

Summary of Contents for Dzire

Reviews:

Related manuals for Dzire

Brands by name

Popular brands