Martin Imager Series, Operator'S Manual

Page: 8 / 84

8 Introduction
Task checklist
√
Task See
Install Imager Base Imager Base user
manual (P/N
35000128)
Unpack and check all parts are included page 9
Install any optical options such as gobos, lens, filters, or a
moving mirror. page 43
Install Imager J-Box and connect it to Imager Base page 12
Choose a location and connect Imager to J-Box page 13
Create data link if using multiple fixtures page 16
Set Imager personalities using the control menus page 20
When DMX control device is used
Connect DMX control device (if used) page 38
Using the control menus, set Imager profile option to “d1”
or “d2” and set the DMX address page 20 and page 39
Program show, or use live control, with DMX control device page 40
When stand-alone program is used ( not available in software Version 1 )
If optional IR is used:
• Ensure data link not terminated page 29
• If this is the first fixture in the data link, install the
optional IR receiver
page 30
• Set fixture IR address page 20
If synchronous triggering of multiple fixtures is to be used,
set triggering options (is the fixture receiving or sending
scene change triggers?)
page 27
Create stand-alone program, using:
• MP-2 Upload device, or the page 29
• Optional IR remote control page 29
Run stand alone program page 33