Martin Imager Series, Operator'S Manual

Page: 34 / 84

34 Stand-Alone show playback
Scene execution Using the optional
MC-X
The MC-X is an optional remote control unit that is available from Martin.
Once the remote controller is connected, 7 scenes can be conveniently
called up on the MC-X's buttons.
To enable control:
1 Connect the MC-X controller to the Imager’s data network via an XLR-to-RJ-
45 adaptor. If multiple Imagers are connected, plug the controller into the
first fixture in the link.
2 On each fixture, select S A / r u n / O F F and press [enter]. Press [menu] to
exit the S A menu.
3 On each fixture, select P r o / d 1 and press [enter]. Press [menu] to exit
the P r o menu.
4 To trigger scenes 00-06, press the numbered preset buttons on the MC-X.
5 To have each fixture run its own routine, press [Auto].
Using the P E r / n n O menu it is possible to set button 7 on the MC-X to
control the lamp off function. See “Control menu structure” on page 66.
DMX controller override during
Stand-Alone show playback
If an Imager is connected to a DMX controller and receives DMX signals
during show playback, the Stand-Alone show will stop running and the
fixture will respond to the DMX controller. DMX signals always have priority
over the running of a Stand-Alone show.