Martin Imager Series, Operator'S Manual

Page: 32 / 84

32 Programming using the optional infrared remote control
• Prev (previous scene) scrolls backwards through
scenes on selected fixtures.
• Next (next scene) scrolls forwards through scenes on
selected fixtures.
• Store (store scene) saves effect and timing settings to
the current scene.
• Delete (delete scene) removes the current scene from
memory. Scenes above the deleted scene are
renumbered.
• INS (insert scene) creates and saves a new scene
before the current scene, which moves up a number.
• ADD (add scene) creates a new scene at the end of
the sequence with the settings that are active when
the scene is created.
Effects Adjustment
The look of a scene is programmed by first selecting an option with the
effect selection buttons and then adjusting the option with the position
adjustment buttons. When two effects are assigned to a selection button,
the up/down arrows control one effect and the left/right arrows control the
other effect. If there is only one effect, the up/down arrows usually provide
course adjustment and the left/right arrows usually provide fine adjustment.
The middle button returns effects to a default position.
Fixture selection
Position adjustment
Scene selection
Effects selection
Execution
Scene timing
Lamp power
00 01 02
00 01 02 03
00 01 02 03
Store saves
settings in the
current scene.
Add saves
settings in a new
scene at the end
of the sequence.
Insert saves
settings in a new
scene before the
current scene.