14
Turn On the Ignition
3 long chirps and 3 flashes of the parking lights
will confirm exit of the programming mode.
Note: Waiting 15 seconds after the last command
will also cause the system to automatically exit
the programming mode.
One Chirp
Two Chirps
Three Chirps
Button
LED One Pulse
LED Two Pulse
LED Three Pulse
(Factory Default Setting)
Step 4
Keyless Entry Feature Programming (Part 1)
Examine the two different feature charts enclosed and decide which feature to change. Circling the feature to be
changed will make the programming process much easier to perform.
Turn the ignition switch from the OFF position to the
ON position 3 times, leaving it in the OFF position the
third time.
Before 15 seconds has passed, push and release the
valet switch 1 time. Then push the valet switch a
second time and hold it in until 1 short and 1 long
chirp/beep is heard then release it. You are now in
transmitter Part 1 programming mode.
Step 1
Step 2
3X
1X + 1X (Hold)
Step 3
Remote Feature Programming
Use the transmitter buttons as illustrated to adjust the desired features. Keep repressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirp/beeps are heard. Then move on to
the next feature.
Chirps On
Chirps Off
Parking lights On for 30
seconds after an unlock signal
from the transmitter
Parking lights on 10 seconds
after a lock signal and 30
seconds after an unlock signal
Pathway Illumination Feature Off
Harness 3 - Pink wire
2-step door unlock output On
Harness 3 - Pink Wire
Factory security disarm output
Harness 3 - Pink Wire
Start Status Output On
Harness 2 - Brown Wire
Horn Honk Output
Harness 2 - Brown Wire
Factory security rearm output
+
Harness 3 - White wire
Dome Light Illumination
Output On
Harness 3 - White Wire
Ground Output During
Start (Crank)
M6A-IM 3/10/05 2:43 PM Page 14