22
Returning to Factory Default Settings
Turn the ignition switch from the
OFF position to the ON position 3
times leaving it in the Off position
the third time.
3X
Step 1
Before 15 seconds has passed, push
and release the valet switch 11 times
then push the valet switch a twelfth
time and hold it down until 6 short
chirps/beeps then release it. You are
now in the “Return to Factory Default
Setting” programming mode.
11X + 1X (Hold)
Step 2
Press the (Lock) and (Trunk) button
on the transmitter together for 6
seconds, there will be a confirmation
of six chirps with 3 long chirp and 3
parking light flashes to confirm the
system “Keyless Entry Features 1 and
2 Programming” all returns to factory
default setting.
Step 3
Turn On the Ignition
3 long chirps and 3 flashes of the
parking lights will confirm exit of the
programming mode.
Note: Waiting 15 seconds after the
last command will also cause the
system to automatically exit the
programming mode.
Step 5
The unit has the ability to report the cause of the last shutdown of the remote start system.
Enter:
1. Turn the Ignition switch to “On” position.
2. Press the (Trunk) button on the transmitter
3. The LED will now report the last system shutdown by flashing for 3 cycles in the following grouped patterns:
Shutdown Diagnostics
Step 4
Press the (Trunk) button first, then press the (Lock) and
(Trunk) buttons on the transmitter together for 6 seconds.
There will be a confirmation of six chirps with 3 long chirps
and 3 parking light flashes to confirm the system "Remote
Start Features 1 and 2 Programming" all returns to factory
default settings.
+
M6A-IM 3/10/05 2:44 PM Page 22
