16
Turn the ignition switch from the OFF position to the
ON position 3 times leaving it in the OFF position the
third time.
Before 15 seconds has passed, push and release the valet
switch 7 times then push the valet switch a eighth time
and hold it down until 4 short chirps/beeps + 1 long chirp
beep is heard then release it. You are now in Stage 1
Remote Start Feature Programming Mode.
3X
7X + 1X (Hold)
One Chirp
Two Chirps
Three Chirps
Four Chirps
Button
LED One Pulse
LED Two Pulse
LED Three Pulse
LED Four Pulse
(Factory Default Setting)
Step 3
Remote Feature Programming
Use the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirp/beeps is heard. Then move on to the
next feature.
10 Minute Run Time
Factory Alarm Disarm
with Channel 2 “On”
Diesel Engine and
10 Second Warm Up
Gasoline
Engine
Diesel Engine and
15 Second Warm Up
Diesel Engine and
20 Second Warm Up
20 Minute Run Time
30 Minute Run Time
5 Minute Run Time
Without this Feature
Constant Parking
Light Output
Flashing Parking
Light Output
Remote Start Feature Programming Stage 1
Step 1
Step 2
Examine the two feature charts enclosed and decide which features to change. Circling the feature to be changed
will make the programming process much easier to perform.
Press the (*) Button =
Activates Remote Start
Press the (* - *)
Button = Activates
Remote Start
+
Press the (Lock) + (*)
Button = Activates
Remote Safe Start
3 Hour Time Start
2 Hour Time Start
+
(continued on the next page)
M6A-IM 3/10/05 2:43 PM Page 16
