Rolling Alarm Clock Instruction Manual CE3410
Congratulations on purchasing the Rolling Alarm Clock with Musical Alarm and Rolling
functions. Please take time to read the instructions below.
Functions
- LCD Clock Display
- Alarm Function (15 minutes continuous Alarm)
- 10 Musical Alarm setting
- Rolling function
- Backlight
- 3 X AAA batteries (not included)
Installing batteries
Your clock requires 3 X AAA batteries; follow below procedure and refer to the diagrams to install batteries
1. Slide the safety catch and turn the front clock part in the direction of the arrow.
2. Gently remove the main section of the clock to locate the battery cover.
3. Use Phillips screwdriver and carefully loosen the two screws from the battery compartment cover.
4. Install 3 X AAA batteries observing the correct polarities, making sure that the batteries pull out ribbon is under the
batteries.
5. Now safely place the battery cover back into the position, making sure the access battery pull out ribbon is folded
over the batteries.
6. Now secure the battery compartment cover tightening the two screws.
7. Replace the clock cover and lock it into the position.
Battery Precautions
•
Do not mix different types or old and new batteries.
•
Only use batteries of the same or equivalent type recommended.
•
Batteries should be inserted with the correct polarity.
•
Exhausted batteries are to be removed.
•
The supply terminals are not to be short circuited.
•
Do not use re-chargeable batteries.
•
Do not mix Alkaline, standard or rechargeable batteries.
•
Batteries should be replaced by an adult.
