Revision 1.8.3
Page 17
Hardware OFF Timer
– displays the value of a hardware timer in Maretron’s DCR100, SIM100
and RIM100 that accumulates the elapsed time that the indicator has spent in the OFF state.
This timer may be reset with the control mode of the display
– see Section 5.2.7.14 for details)
Hardware ON Timer
– displays the value of a hardware timer in Maretron’s DCR100, SIM100 and
RIM100 that accumulates the elapsed time that the indicator has spent in the ON state. This
timer may be reset with the control mode of the display
– see Section 5.2.7.14 for details)
Hardware ERROR Timer
– displays the value of a hardware timer in Maretron’s DCR100,
SIM100 and RIM100 that accumulates the elapsed time that the indicator has spent in the
ERROR state. This timer may be reset with the control mode of the display
– see Section
5.2.7.14 for details)
4.2.17
Mechanical
dB
– displays a level (sound, power) measured by a sensor that transmits a decibel level
Force
– displays mechanical force from a load cell
Strain
– displays the amount of mechanical strain an object is subjected to
4.2.18
Motion
Acceleration
– displays acceleration
Angle
– displays an angle transmitted by an angle sensor (e.g., mast rotation angle)
Angular Velocity
– displays angular velocity
Angular Acceleration
– displays angular acceleration
Distance
– displays a linear distance
Rotational Rate
– displays rotational rate (e.g., shaft speed)
Velocity
– displays linear velocity
4.2.19
Navigation
The DSM570 is not a primary navigation device; that is, it does not provide means for entering and
storing waypoint and route data. The DSM570 can receive information on the current leg of the
voyage from a primary navigation device (such as a chart plotter or PC with navigation software and
NMEA 2000
®
interface) and display this information.
Bearing Orig to Dest
– displays the direction from the origin waypoint to the destination waypoint
Bearing To Waypoint
– displays the bearing to the destination waypoint
Course Over Ground
– displays the current Course over Ground (always referenced to true
north)
Cross Track Error
– displays the cross-track error (minimum distance from the boat to the
programmed route)
Distance To Waypoint
– displays the distance to the destination waypoint
Est. Time of Arrival
– displays the Estimated Time of Arrival at the waypoint
Lat/Lon
– displays the current latitude and longitude of the vessel
Rolling Road
– displays navigation information for the current leg of the route
Set/Drift
– displays the direction (set) and speed (drift) of the water current
Speed Over Ground
– displays current Speed over Ground (relative to the earth, not the water)
Time To Go
– displays the estimated Time to Go until arrival at the waypoint
VMG to Waypoint
– displays the Velocity Made Good; that is, the speed at which the distance to
the waypoint is decreasing
Waypoint Number
– this displays the number of the destination waypoint
