DSM570
User’s Manual
Page 70
Revision 1.8.3
Figure 53
– DCR100 Current Sensor Zero Offset Calibration Screen
Press
Begin
to execute the calibration process or
Cancel
to return to the previous menu. During the
calibration process, all channels will be turned off. When the calibration is complete, the following
screen will be displayed.
Figure 54
– DCR100 Current Sensor Zero Offset Calibration Completion Screen
Press the
Back
button to return to the previous menu.
6.6.1.2 Device Instance
This entry allows you to program the NMEA 2000 device instance for the unit. You usually will not
need to modify the defau
lt value of “0”.
6.6.1.3 Installation Description
This entry allows you to modify the NMEA 2000 installation description text strings. You can enter
any information you like here, such as the date the unit was installed, or the location in which it was
