DSM570
User’s Manual
Page 20
Revision 1.8.3
4.2.28
Transmission
The DSM570 supports the display of information for up to four transmissions.
Gear
– displays the current gear of the transmission (forward, neutral, or reverse)
Oil Pressure
– displays the pressure of the oil in the transmission
Oil Temp
.
– displays the temperature of the oil in the transmission
Warning
– displays warning indications generated by the transmission
4.2.29
VDR
The DSM570 supports display of status of a Vessel Data Recorder.
Status
– displays the operating state of the VDR
Memory Capacity
– displays the total memory capacity of the USB flash drive in the VDR
Memory Used
– displays the total amount of memory used on the USB flash drive in the VDR
Memory Available
– displays the total amount of memory remaining on the USB flash drive in the
VDR
Percent Used
– displays the percentage of the memory capacity of the USB flash drive in the
VDR that is filled with data
Percent Available
– displays the percentage of the memory capacity of the USB flash drive in the
VDR that is still available for data storage
4.2.30
Vessel
Heave
– displays heave (vessel movement along the vertical axis)
Keel
– displays the height of a swing keel
Pitch
– displays the pitch of the vessel (rotation about the horizontal axis perpendicular to the
ship’s keel)
Roll
– displays the roll of the vessel (rotation about the horizontal axis parallel to the ship’s keel)
Trim Tabs
– displays the position of the vessel’s trim tabs
Trim Tab Port
– displays the position of the port trim tab
Trim Tab Starboard
– displays the position of the starboard trim tab
4.2.31
Wind
Apparent
Direction
– displays the angle of the wind relative to the vessel center line as it
appears to an observer on the deck of a moving or stationary vessel (does not subtract out the
speed of the vessel)
Ground Direction
– displays the angle of the wind relative to true or magnetic north (depending
on the unit setting o
f the “heading” parameter, see Section 5.2.7.1) measured relative to a
stationary observer, calculated using heading, course over ground (COG), and speed over
ground (SOG)
True Direction
– displays the angle of the wind relative to the vessel center line (vessel’s speed is
subtracted from Apparent wind direction), calculated using speed through water (STW) or
speed over ground (SOG) (depending on the unit setting of the “Wind True Vessel Ref.”
Parameter, see Section
Apparent Speed
– displays the speed of the wind as it appears to an observer on the deck of a
moving or stationary vessel (does not subtract out the speed of the vessel)
Ground Speed
– displays the speed of the wind relative to a stationary observer, calculated using
heading, course over ground (COG), and speed over ground (SOG)
