DSM570
User’s Manual
Page 102
Revision 1.8.3
6.12.4.1.12 Volume Instance
Program this parameter to match the desired instance number of the volume reading for this channel.
You can program this parameter to any value between 0 and 252. The default value for this
parameter is 0.
6.12.4.1.13 Volume Label
Program this parameter with a text string which identifies the particular volume parameter being
monitored by this channel. Maretron display products will display this label text when you are
selecting data to display.
6.12.4.2
Channel #0 Configuration Menu (Two Independent Sensors Mode)
T
his section describes the Channel #0 configuration parameters when the FFM100’s operating mode
has been set to “Two Independent Sensors”. The Channel #0 (Two Independent Sensors Mode)
menu is too large to fit on a single screen, so it is shown in two separate screenshots below.
Figure 90
– FFM100 Channel #0 First Configuration Screen (Two Independent Sensors Mode)
Figure 91
– FFM100 Channel #0 Second Configuration Screen (Two Independent Sensors
Mode)
