DSM570
User’s Manual
Page 100
Revision 1.8.3
6.12.4.1
Channel #0 (Differential Mode)
This section describes the Channel #0 configuration parameters when the FFM100’s operating mode
has been set to “Differential”. The Channel #0 (Differential Mode) menu is too large to fit on a single
screen, so it is shown in two separate screenshots below.
Figure 88
– FFM100 Channel #0 First Configuration Screen (Differential Mode)
Figure 89
– FFM100 Channel #0 Second Configuration Screen (Differential Mode)
6.12.4.1.1
Channel Supply/Return
You may select whether the Channel #0 fuel flow sensor is connected to the supply fuel line or the
return fuel line.
6.12.4.1.2
Engine Instance
Program this parameter to match the desired engine instance number of the flow rate and total fuel
used for this channel. You can program this parameter to any value between 0 and 252.
