Revision 1.8.3
Page 203
Figure 233
– Setting the Barometric Pressure
Use the
Increase
and
Decrease
buttons to select the correct pressure, and the press the
Enter
button to store it.
6.31.6
Outside Humidity
The Humidity is pre-calibrated before leaving the factory and should not require adjustment. However,
the current humidity level may be entered in this screen to re-calibrate the WSO100 should this be
required.
Figure 234
– Setting the Outside Humidity
Use the
Increase
and
Decrease
buttons to select the correct humidity, and the press the
Enter
button to store it.
6.31.7
Outside Temperature
The Temperature sensor is pre-calibrated before leaving the factory and should not require
adjustment. However, the current temperature may be entered in this screen to re-calibrate the
WSO100 should this be required.
